Intelligent DSP RF Receiver labeled with theater
Side view of the sleek and discreet LR 4200 72 MHz Receiver showing headset jack and charger plug
Back of the LR4200 iDSP 72 MHz receiver
Man smiling wearing an Intelligent DSP RF Receiver with a neckloop and earbud

Intelligent DSP RF Receiver (150MHz)

Item:LR-4200-150

The LR-4200-150 receiver from Listen Technologies offers outstanding audio clarity and quality with the best range and reception in its class.

Part of our Intelligent Digital Signal Processing (iDSP) line, the LR-4200-150 is the smallest device of its kind, resulting in a compact unit thast is easy for users to carry, wear, and use. An integrated neck loop/lanyard offers hands-free convenience, and the DSP loop driver offers an improved listening experience for anyone with a T-coil-equipped hearing aid. Dual 3.5mm output jacks also allow receivers to be shared between users.

Each receiver is also equipped with a micro USB connection, making it easy for venues to charge and update the units via any standard USB port.

The LR-4200-150 incorporates advanced Lithium-ion rechargeable batteries that offer long life and reliable power, allowing each receiver to provide outstanding performance even during longer presentations or conferences. Charge status, along with channel information and volume level, are easy to read on the integrated OLED display.

The LR-4200-150 is an outstanding receiver choice for any venue looking to offer convenient, reliable assistive listening with best-in-class clarity.

Download Product Data Sheet
See Architectural & Engineering Specs

This product is available through authorized resellers.

Request Quote

Includes

One (1) LR-4200-150 Intelligent DSP RF Receiver (150 MHz)*

 

*The LR-4200-150 comes with a quick start guide and a non-proprietary field replaceable Lithium-ion battery.

Highlights

  • High-performance 150 MHz RF receiver offering best-in-class sensitivity and 20dB less noise than other devices
  • Integrated neck loop/lanyard with DSP loop driver for an enhanced T-coil listening experience
  • Smallest device of its kind makes it easier to wear and use and for venues to dispense, store and maintain
  • OLED display showing channels, battery status, channel status, volume level, and more
  • Limited lifetime warranty with hassle-free support
  • Lanyard and belt clip options offer convenient and discreet choices for the end user
  • Advanced rechargeable battery technology eliminates the costs and hassles associated with frequent battery replacement
  • Designed for single-channel applications

Also Needed

A picture of Universal Ear Speaker.

Universal Ear Speaker

SKU: LA-401
A picture of the Intelligent 12-Unit Charging Tray.

Intelligent 12-Unit Charging Tray

SKU: LA-381
Aux cord shown with earbuds

Universal Stereo Ear Buds

SKU: LA-405
Universal single ear bud with extension cord

Universal Single Ear Bud

SKU: LA-404
A picture of Universal Behind-the-Head Stereo Headphones.

Universal Behind-the-Head Stereo Headphones

SKU: LA-403
A picture of Universal Stereo Headphones.

Universal Stereo Headphones

SKU: LA-402
A picture of an Intelligent 12-Unit Charging/Carrying Case.

Intelligent 12-Unit Charging/Carrying Case

SKU: LA-380
A picture of an Intelligent Ear Phone/Neck Loop Lanyard.

Intelligent Ear Phone/Neck Loop Lanyard

SKU: LA-430
A picture of a 4-Port USB Charger

4-Port USB Charger

SKU: LA-423
USB to Micro USB Cable

USB to Micro USB Cable

SKU: LA-422
A picture of a Stationary RF Transmitter (150 MHz)

Stationary RF Transmitter (150 MHz)

SKU: LT-800-150-04

Specs

+Audio

System Distortion< 2% total harmonic distortion (THD) at 80% deviation
Output/sTwo (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
System Frequency Response50 Hz - 15 kHz (±3 dB)
System Signal to Noise RatioSQ enabled 80 dB, SQ disabled 60 dB

+Controls

User ControlsPower, up/down volume
ProgrammingVia software and USB port
Set-up ControlsPress and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel

+Indicators

LEDsFlashes when batteries are low or to indicate charging, solid when fully charged
DisplayChannel designation,battery level, unit number, charging status

+RF

Frequency Range150.850 - 152.350 MHz
Number of Channels6 wide band, 26 narrow band
Sensitivity.6uV typical, 1 uV maximum for 12 dB sinad
SquelchProgrammable in 20 steps, automatic on loss of RF signal
Antenna TypeUses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable

+Power

Power SupplyMicro USB connector, 5 V, 500 mA
Battery TypeLithium Ion 3.7 Vdc, 1200 mAh
Battery Life8 Hours of continuous use
Battery Charging TimeFully charged in 2.5 Hours

+Physical

ColorBlack
Unit Weight with Batteries2.40 oz. (68 g)
Shipping Weight3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum
Dimensions (H x W x D)3.75 x 2.00 x 0.64 in. (9.6 x 5 x 1.7 cm)
Unit Weight1.60 oz. (45 g)
Dimensions with Belt Clip3.75 x 2.00 x 0.80 in. (9.6 x 5.0 x 2.1 cm)

+Environmental

Temperature - Operation14 to 104 ºF (-10 to 40 ºC)
Temperature - Storage(-)4 to 122 °F (-20 to 50 °C)
Relative Humidity0 to 95% relative humidity, non-condensing

+Compliance

Marks and ApprovalsRCM, RoHS

FAQs

+What is the difference between the LR-4200 and the LR-5200?

The main difference is that the LR-5200 is programmable with a multi-function Listen button. It gives the user an opportunity to program only the desired channels and lockout the unused channels. This makes it simple to operate for end users that need to select between multiple active channels. The Listen Button can also be used to search for an active channel and lock the receiver on a specific channel.

+What is the purpose of Squelch?

The purpose of squelch is to mute the audio output of your receiver when the signal from the transmitter is turned off or is too weak to be received. Without squelch you would hear radio noise in your earphone. The squelch function can be programmed to the desired setting.

+What is the function of SQ?

To reduce noise of the systems, Listen offers a noise reduction technology called ListenSQ™. Both the transmitter and receiver must have SQ on to achieve the desired results. If you are planning to use this product with older Listen systems or equipment not manufactured by Listen, you should disable SQ.

+What type of battery technology does the LR-4200 use?

The LR-4200 uses a non-proprietary field replaceable Lithium Ion battery.

+How long does it take to fully charge the LR-4200?

It varies dependent on the depletion of the battery. A fully depleted battery will charge in 2.5 hours or less.

+How many LR-4200 receivers can I use in a system?

As many as you need, the number is endless.

+How long will the LR-4200 run on a fully charged battery?

The LR-4200 will run continuously for 8 hours on a fully charged battery