Configurations
LR-3200-072 Basic DSP RF Receiver (72 MHz)
Architectural Specs
The RF receiver shall be capable of receiving on one of 3 default wide band channels (A, E, H). The receiver shall tune to a single channel and user shall not be able to change the channel. The receiver shall have a signal-to-noise ratio of 70 dB or greater with DSP SQTM noise reduction technology disabled and 80 dB or greater with SQTM enabled and shall have an audio frequency response of 50 Hz – 15 kHz (±3 dB). The receiver shall have the option of being lanyard or belt clip worn and the lanyard shall have the option of an integrated neck loop. The receiver shall have a USB connector used for inventory control, set up, charging and firmware upgrades. The receiver shall incorporate automatic battery charging circuitry and use a non-proprietary lithium ion battery. The receiver shall fully charge in under 2.5 hours and have a battery run time of over 24 hours. The receiver shall have additional charging contacts to allow multiple charging options. The Listen LR-3200-072 is specified.